SPRAY QUICK-SETTING RUBBER ASPHALT LIQUID BITUMEN WATERPROOFING COATING
Spray quick-setting rubber asphalt liquid bitumen waterproofing Coating is a highly elastic, waterproof, anti-corrosion, and seepage-resistant coating. it is made by combining modified emulsified asphalt (part a) with synthetic polymers and special film-forming agents (part b). when sprayed on site, it quickly forms a dense, flexible, and durable waterproof layer, creating a “skin-like” rubber coating that provides excellent performance.
in simple terms, this two-component system consists of high-performance rubberized asphalt and chemical catalysts, offering fast curing and setting. the combination of this product’s advanced performance and scientific application methods ensures high-quality results and promotes the use of new technologies.
SPRAY QUICK-SETTING RUBBER ASPHALT LIQUID BITUMEN WATERPROOFING COATING DESCRIPTION
BITUMEN WATERPROOFING SPRAY QUICK-SETTING RUBBER ASPHALT LIQUID PRODUCT FEATURES
- SPRAY APPLICATION TECHNIQUE: HIGH EFFICIENCY WITH SEAMLESS CONNECTION AND NO WATER LEAKAGE. IDEAL FOR COMPLEX OR IRREGULAR STRUCTURES AND EASY TO APPLY. ELONGATION UP TO 1000%, WITH A RECOVERY RATE OF OVER 90%. IT SOLVES PROBLEMS LIKE STRESS DEFORMATION, EXPANSION CRACKING, AND PIERCING.
- SEAMLESS COVERAGE: ENSURES NO WATER LEAKAGE AND PEELING BETWEEN THE COATING AND SUBSTRATE. PERFECT FOR COMPLEX STRUCTURES AND MAKES “SKIN-LIKE” WATERPROOFING LAYER FORMATION SIMPLE AND RELIABLE. COMPATIBLE WITH REINFORCED CONCRETE, STEEL PLATES, PLASTIC, AND VARIOUS MASONRY MATERIALS.
- EXCELLENT TEMPERATURE RESISTANCE: FLEXIBILITY DOWN TO -40°C, SUITABLE FOR COLD CLIMATES; HEAT RESISTANCE UP TO 160°C, IDEAL FOR ROAD AND BRIDGE WATERPROOFING. SIMPLE SPRAY SURFACE TREATMENT WITHOUT NEEDING A SMOOTHING LAYER, CAN BE APPLIED IN HUMID CONDITIONS (HUMIDITY BELOW 80%).
- ENVIRONMENTALLY FRIENDLY: NO VOLATILE ORGANIC COMPOUNDS, ODORLESS, NO WASTE GAS EMISSIONS, AND NO POLLUTION, SUITABLE FOR CLOSED SPACES.
- DURABLE COATING: WEATHER-RESISTANT, ACID-ALKALI RESISTANT, AND ANTI-AGING PROPERTIES. NO NEED FOR ADDITIONAL PROTECTIVE LAYER, REDUCING CONSTRUCTION COSTS.
- LONG SERVICE LIFE: CAN LAST UP TO 50 YEARS AND IS SUITABLE FOR USE IN ENVIRONMENTS ABOVE 5°C. EXCELLENT RESISTANCE TO PEELING AND PIERCING.
- INSTANT FORMATION: FORMS A SOLID FILM WITHIN 3-5 SECONDS AFTER SPRAYING, CAN BE WALKED ON IMMEDIATELY, WITH OVER 15 TIMES EXTENSIBILITY AND 95% RECOVERY RATE. ALSO HAS EXCELLENT NOISE ISOLATION PROPERTIES.
- HIGH CONSTRUCTION EFFICIENCY: INSTANT FILM FORMATION AFTER SPRAYING, CAN BE WALKED ON AND FOLLOWED BY NEXT CONSTRUCTION STEPS. PROFESSIONAL SPRAY EQUIPMENT CAN COVER OVER 1500M² PER DAY. MULTIPLE SPRAYING TECHNIQUES (SPRAYING, BRUSHING, ETC.) CAN MEET VARIOUS REQUIREMENTS SUCH AS DRAINAGE OUTLETS, ANGLES, AND CRACKED SURFACES.
- EXCEPTIONAL ELONGATION: SOLVES WATER LEAKAGE CAUSED BY STRESS DEFORMATION. THE RAPID CURING SPRAYING PROCESS CREATES A SOLID FILM THAT PREVENTS WATER PENETRATION.
- STRONG PUNCTURE RESISTANCE: EXCELLENT EXTENSIBILITY DUE TO RUBBER IN THE COATING.
- SUPERIOR CHEMICAL AND TEMPERATURE RESISTANCE: EXCELLENT HEAT AND COLD RESISTANCE. COMPARED TO ASPHALT-BASED COATINGS, IT OVERCOMES ASPHALT’S LIMITATIONS BY OFFERING EXCEPTIONAL FLEXIBILITY AND ELASTICITY, MAKING IT SUITABLE FOR EXTREME CONDITIONS.
- APPLICATION ON WET SURFACES: CAN BE APPLIED ON WET SURFACES, SIMILAR TO POLYUREA, WHICH ALLOWS IT TO PERFORM WELL UNDER MOIST CONDITIONS.
- EXCELLENT ADHESION: STRONG ADHESION TO CONCRETE, WOOD, METAL, GLASS, AND OTHER SURFACES WITHOUT LAYER SEPARATION, PROVIDING PROTECTION TO THE SUBSTRATE.
- MULTIFUNCTIONAL: IN ADDITION TO EXCELLENT WATERPROOFING, THE COATING ALSO PROVIDES CORROSION PROTECTION, DAMPING, AND NOISE REDUCTION.
- WATER-BASED: AS A NEW-GENERATION WATER-BASED MATERIAL, IT DOES NOT USE ORGANIC SOLVENTS, IS ODORLESS, PRODUCES NO WASTE MATERIALS, AND EMITS NO HARMFUL GASES. CAN BE APPLIED WITHOUT HEATING, WITH NO OPEN FLAMES, ENSURING SAFETY AND RELIABILITY DURING CONSTRUCTION.
BITUMEN WATERPROOFING SPRAY QUICK-SETTING RUBBER ASPHALT LIQUID CONSTRUCTION PROCESS
STEP 1:
The two-component (spray) system consists of Component A (liquid) and Component B (liquid), mixed in the correct ratio and pressure using specialized spray equipment. The coating forms a solid film in 3-5 seconds, ideal for applications such as tunnel roofing or large-scale waterproofing.
STEP 2:
Before large-scale spraying, ensure the additional layer has completely solidified. Check the spray machine’s integrity, cleanliness, material transfer tubes, filters, and valves to ensure proper operation. Divide the spraying area into sections and perform pre-masking to avoid overspray.
STEP 3:
Adjust the nozzle distance, angle, and spray equipment pressure to ensure an even, uniform coating without exposing the base material. The sprayed material should form a consistent, thick layer.
BITUMEN WATERPROOFING SCOPE OF APPLICATION
- ROOFS, UNDERGROUND WATERPROOFING, INDOOR WATERPROOFING, AND ANTI-CORROSION ENGINEERING.
- WATERPROOFING AND ANTI-CORROSION LAYER APPLICATION SHOULD BE CONDUCTED AT TEMPERATURES ABOVE 5°C. IN CLOSED, HUMID ENVIRONMENTS, VENTILATION EQUIPMENT SHOULD BE INSTALLED BEFORE APPLICATION. AVOID APPLYING IN RAINY OR SNOWY WEATHER, OR WHEN WINDS EXCEED LEVEL 5.
