This product is made from high-quality modified acrylic ester multi-component copolymer emulsion as the base material, with the addition of various auxiliaries and fillers, and processed scientifically. It is a single-component water-based polymer waterproof coating with the following features: Excellent Waterproof Performance: The coating provides outstanding waterproofing, effectively preventing water penetration and protecting the substrate from moisture damage. High Elasticity…
Solid waterproof adhesive is a new type of polymer waterproof sealing material, which is made of modified polymer formula and has excellent waterproof sealing performance. Unlike traditional liquid waterproofing adhesives, solid waterproofing adhesives exist in solid form, which are softened by heating or directly crimped when used, and then form a strong waterproof sealing layer when cooled.
Our high-purity butyl rubber sealing tape offers superior adhesion and long-lasting waterproof performance. It firmly bonds to metal, glass, concrete, and plastic while maintaining flexibility without hardening or cracking. Designed for extreme conditions, it withstands temperatures from -40°C to 90°C, resists UV exposure, and remains durable for over 10 years. Safe and eco-friendly, it contains no solvents or asphalt and…
Cement-based penetration crystalline waterproof material is a rigid waterproof material. After reacting with water, the active chemicals in the material penetrate into the concrete through a carrier. These chemicals then form insoluble crystals inside the concrete, filling the capillaries and pores. As a result, the concrete becomes more dense and impermeable, achieving a waterproofing effect.
The Multicolor SBS/APP Modified Bitumen Waterproof Membrane is a new type of waterproofing material made from high-quality asphalt, combined with SBS and APP. It uses a polyester base, coated with a multi-colored 3D surface for decorative effect. This product is an upgraded version of traditional waterproof membranes and asphalt shingles. It integrates both waterproofing performance and aesthetic decoration, making it…
Wide Self-Adhesive Pre-Laid Polyester Reinforced Waterproof Membrane (Hereinafter referred to as pre-laid PY type) This product features a bitumen-based polyester-reinforced waterproofing membrane as the core material, enhanced with functional additives. Both sides are coated with a self-adhesive layer and protected by a peelable silicone release film. This ensures reliable adhesion and effective waterproofing performance in pre-applied applications. Wide Self-Adhesive Polymer…
Our polyurethane grouting fluid is a high-performance waterproof solution designed for leak plugging, structural reinforcement, and water seepage prevention. Available in oil-based and water-based formulations, it adapts to various construction needs. The oil-based grout is ideal for drier environments, forming a durable, high-strength waterproof layer, while the water-based grout excels in wet conditions, expanding quickly to seal cracks effectively. Both…
1.Non-toxic, Harmless, and Pollution-Free: Safe for use in drinking water projects and other applications. 2.Excellent Elasticity, Water Resistance, and Durability: The coating has high elasticity, excellent water resistance, and long-lasting durability. 3.Versatile Application: Can be directly applied to a variety of substrates, whether wet or dry. 4.Easy Application with Short Construction Time: Simple to apply and reduces construction time.
K11 Waterproofing Coating, also known as K11 Premium Waterproof Material, is a two-component polymer-modified high molecular polymer waterproof system. This product k11 waterproofing coating consists of a unique and highly active polymer powder, synthetic rubber, synthetic styrene resins, and other components blended into an emulsion. It is further mixed with base materials, chemical additives, and fillers, and processed through plasticizing,…
Plugging spirit is a new type of rigid waterproof plugging material, which has the characteristics of rapid condensation hardening and rapid strength generation. The initial and final coagulation time interval is very short, and the intensity is rapidly generated after the final coagulation, which can become hard within 1 minute, the strength is greater than 10MPa in 15 minutes, and…
Liquid waterproofing membrane is an ultra-fine, suspended high-performance waterborne asphalt coating formed by a special process of SBS, asphalt and additives. The coating has excellent elasticity, self-healing, adhesion and aging resistance, and is easy to use, which is called water-based polymer waterproof coating, that is, liquid waterproof membrane.
The Modified Bitumen Waterproofing Material for Roads and Bridges is a type of waterproofing membrane made from modified asphalt, primarily using thermoplastic elastomers such as SBS (Styrene-Butadiene-Styrene) or polyolefin-based polymers such as APP (Atactic Polypropylene), combined with various additives. The membrane consists of a polyester base coated with modified bitumen, with fine sand, mineral granules (or flakes), or polyethylene film…
Non-asphalt polymer self-adhesive membrane waterproofing membrane is a new type of polymer waterproofing membrane made of modified high-density polyethylene as the base material, thermally compounded with a non-asphalt-based polymer self-adhesive layer, and the isolation layer is made of sand with special properties or aging-resistant polyethylene silicone oil.
Non-curing rubber asphalt coating is a waterproofing material primarily composed of rubber, asphalt, and softening oils, combined with temperature control agents and fillers. It maintains its adhesive, paste-like consistency throughout its service life. This coating is particularly effective for waterproofing in areas with structural movement, such as expansion joints, and is widely used in non-exposed building waterproofing applications.
Polyethylene-Polypropylene (Polyester) Polymer Waterproof Membrane is a new type of waterproof material made by integrating four layers: a reinforcing protective layer, an anti-aging layer, a waterproof layer, and a tack-enhancing reinforcement layer. It uses non-woven fabric and polyethylene as the main raw materials, with chemical additives to enhance performance. This membrane belongs to the FS2 polyethylene resin composite waterproof series.…
Polymer Emulsion construction waterproof Coating is a water-based paint made from polymer emulsion as the base, mixed with pigments, fillers, and additives. It offers excellent water resistance, weather resistance, alkalinity resistance, and durability, as well as superior elongation and low-temperature flexibility. This coating is non-toxic, odorless, and environmentally friendly, providing ease of application with fast drying time. It also features…
In today’s rapidly developing modern world, land resources in large and medium-sized cities have become “as precious as gold,” and the available area for greening is shrinking. Developing planted roofs and creating “sky gardens” has become an essential solution. Modified Asphalt Copper Foil Reinforced Root-Barrier Waterproof Membrane: This is a top-layer waterproof material that prevents plant roots from penetrating. The…
The elastomeric SBS Modified Bitumen/Asphalt Waterproofing Membrane utilizes SBS (styrene-butadiene-styrene) thermoplastic elastomer-modified rubber asphalt as dip coating material.It is reinforced with polyester felt, or specially reinforced polyester-glass fiber felt, and features a surface layer of materials such as aluminum foil, fine sand, or PE film. The membrane is produced through a specialized agitation and grinding process using advanced machinery to ensure optimal…
Self-adhesive polymer-modified bitumen（N）is a self-adhesive waterproofing membrane made from synthetic rubber (such as SBS), high-quality road asphalt, tackifier. It uses polyester film (PET), polyethylene film (PE), aluminum foil, or silicone-coated release film as the upper surface material, with the lower surface coated with silicone release film as an anti-adhesion layer. This type of membrane does not have a base layer.…
Spray quick-setting rubber asphalt liquid bitumen waterproofing Coating is a highly elastic, waterproof, anti-corrosion, and seepage-resistant coating. it is made by combining modified emulsified asphalt (part a) with synthetic polymers and special film-forming agents (part b). when sprayed on site, it quickly forms a dense, flexible, and durable waterproof layer, creating a "skin-like" rubber coating that provides excellent performance. in…
The Strong cross membrane reaction adhesive waterproof coiled material is an advanced waterproofing solution featuring a durable cross-laminated film as its surface substrate. One side is coated with high-performance butyl self-adhesive, while the isolation layer consists of an aging-resistant polyethylene silicone release film. This product complies with the specifications for Wet-Laid Type P II membranes outlined in GB 23457-2009, "Pre-applied/Wet-applied…
Water-based Environmental Protection Polyurethane Waterproof Coating is made from elastic emulsion as the base material, combined with high-quality pigments and imported additives. The product possesses excellent elasticity and adhesion, making it suitable for various waterproofing applications.
